Draper BS228/300D 228mm (9″) Band Saw (230V)

9 inch bandsaw

Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics.

The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45° range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.

Draper BS228/300D 228mm (9″) Band Saw features:

• Adjustable blade tensioning and tracking for precise cutting
• Mitre guide for crosscut work. Graduated to 30 degrees for both left and right hand angles
• Table tilting with 0-45 degree range
• Fitted with a no-volt on/off switch and 53mm dust extraction outlet
• Supplied with 10tpi blade, parallel rip fence and other accessories

Band saw Content:

• 1 X Bandsaw, 228mm, 300W
• 1 x 10tpi blade
• 1 x Parallel rip fence
• 1 x Open ended spanner
• 1 x Push stick
• 1 x Hex key

Specifications:

Voltage: 230V

Frequency: 50Hz

Input: 300W

No load speed: 1400rpm

Maximum throat capacity: 228mm

Cutting depth: 90mm

Maximum capacity: 125mm

Cutting speed: 10.6m/sec (635m/min)

Table size: 300 x 300mm (Tilt to 45 degrees)

Bandsaw dimensions: 510 x 370 x 755mm

Weight: 19kg

Product manual

Product manual of Draper BS228/300D 228mm Band Saw (230V)

Part list of Draper BS228/300D 228mm Band Saw (230V)

Warranty

1 year manufacturer warranty.